Viet Nam opened an anti-dumping investigation on Nov. 6, 2026, into cold-rolled stainless steel from China, Indonesia and Taiwan.
Viet Nam’s Ministry of Industry and Trade opened an anti-dumping investigation on Nov. 6, 2026, into cold-rolled stainless steel from China, Indonesia and Taiwan1.
The ministry acted through Decision No. 2948/QD-BCT, signed by the minister on the same day1. The case is listed as case AD25, and it covers stainless steel sheet and coil under nine tariff codes1.
In short, no new duty applies yet. Shipments of this steel from the three origins now fall under an official review that can end in extra import taxes, and the ministry may impose temporary duties before the review ends1.
What is the stainless steel investigation about?
An anti-dumping investigation is a formal inquiry into whether foreign makers sell goods abroad below their normal price. If they do, and this harms local producers, the importing country can add an extra import tax. That tax is called an anti-dumping duty.
Viet Nam’s stainless steel case at a glance
| Point | What the ministry says |
|---|---|
| Legal act | Decision No. 2948/QD-BCT, Nov. 6, 2026 |
| Goods | Cold-rolled stainless steel, nine HS codes |
| Origins | China, Indonesia, Taiwan |
| Questions tested | Dumping, harm, and cause |
| Duty now | None yet; temporary duty possible |
The Ministry of Industry and Trade (MOIT) opened the case after checking a request from Vietnamese steel makers1. The ministry found the request complete and valid under the trade defence laws1. Trade defence laws are the rules that let a country protect its industry against unfair imports.
The inquiry will look at three questions1:
- Dumping: whether exporters from the three origins sell below normal value in Viet Nam.
- Harm: whether Viet Nam’s own steel industry has suffered damage.
- Cause: whether the low-priced imports caused that damage.
The ministry needs a yes to all three before it can set a final duty. This order of questions follows the ministry’s own description of the case1.
Which steel products and tariff codes are covered?
The case covers certain cold-rolled stainless steel products, sold as flat sheet and coil. A ministry note on a similar case lists their main uses: kitchenware, food equipment, home appliances, building trim and machinery2.
Decision 2948 lists nine tariff codes under the Harmonized System (HS), the international numbering used by customs1:
- 7219.32.00
- 7219.33.00
- 7219.34.00
- 7219.35.00
- 7219.90.00
- 7220.20.10
- 7220.20.90
- 7220.90.10
- 7220.90.90
The ministry’s notice gives the codes but does not publish the full product description in its announcement1.
The same nine codes appeared in Viet Nam’s first stainless steel case in 20143. That earlier decision covered sheet and coil up to 3.5 mm thick that had been heat-treated and cleaned of surface scale3. The new decision’s exact thickness and product limits are not stated in the ministry’s announcement.
Who asked for the stainless steel duties?
Two companies filed the request on behalf of the domestic industry1:
- Posco VST Co., Ltd.
- Tan Viet Metal Science and Technology Co., Ltd. (Cong ty TNHH Khoa Hoc Ky Thuat Kim Loai Tan Viet).
The ministry accepted that these two firms represent the domestic industry1.
The ministry’s announcement does not publish the dumping margins the two firms claim. A dumping margin is the gap between the export price and the normal price, given as a percentage. Readers will see the ministry’s own figures only when it issues preliminary findings.
How will the Ministry of Industry and Trade run the case?
The steps follow Decree No. 86/2025/ND-CP, the government rules on trade defence measures1. The decree was issued on April 11, 2025, and took effect on July 1, 20254.
The ministry describes the process in this order1:
- It sends a short sampling questionnaire to known foreign makers and exporters, and to the representatives of the three origins in Viet Nam.
- If there are many exporters or many product types, it may examine only a sample of companies.
- It then sends full questionnaires to collect data on prices, harm and cause.
- It may set temporary anti-dumping duties after a preliminary finding, to stop further serious harm.
- It checks and verifies the data the parties provide.
- It holds a public hearing where all parties can share facts and views.
- It issues a final conclusion.
The sampling step is the first test for foreign companies. A foreign maker or exporter that misses the sampling questionnaire deadline is treated as not cooperating1.
Who must act, and by when?
The ministry asks every business that imports, exports, distributes, sells or uses the steel to register as an interested party1. An interested party is a company with the right to send information and views to the investigators.
Key dates in the stainless steel case
The registration window is 60 working days from the date the decision takes effect1. The ministry gives the last day as Jan. 5, 20271.
Registration uses a set form, the interested party registration form1. It goes to the investigating authority through TRAV ONLINE, the online filing system of the Trade Remedies Authority of Viet Nam1. The form can also be sent by post or by email1.
The case touches several groups in different ways:
- Makers and exporters in China, Indonesia and Taiwan must answer questionnaires on time to protect their own duty rate.
- Vietnamese importers may face extra duties on future shipments if the ministry finds dumping.
- Buyers in Viet Nam, such as appliance and kitchenware makers, may pay more for steel from these three origins.
- Customs brokers will need to check the HS code and origin of each stainless steel shipment once duties apply.
The ministry recommends that all these groups register to protect their rights under the law1.
Could temporary duties hit shipments before the final ruling?
Yes, the ministry can impose temporary duties during the case. It says it may do so "when necessary", based on the preliminary results, to stop dumping from causing further serious harm1.
The ministry’s announcement does not give a date for the preliminary findings. It also gives no rate. Until the ministry publishes a temporary duty, shipments enter under the normal tariff.
For an importer, the risk is timing. Steel ordered now from China, Indonesia or Taiwan could arrive after a temporary duty starts. The duty would then apply at the border, based on the ministry’s decision at that time.
Has Viet Nam put duties on this steel before?
Yes. In 2014, the ministry put anti-dumping duties on cold-rolled stainless steel from China, Indonesia, Malaysia and Taiwan3. That decision, No. 7896/QD-BCT, applied from Oct. 5, 2014, for five years3.
2014 duty for other exporters, by origin, %
The 2014 rates varied by company and origin3:
- China: 4.64% to 6.87%, with 6.58% for other Chinese exporters.
- Indonesia: 3.07%.
- Malaysia: 10.71%.
- Taiwan: 13.79%, and 37.29% for Yuan Long Stainless Steel Corp.
Those rates belong to the earlier case and say nothing about the rates in the new one. Malaysia is not part of the new investigation1.
How does Taiwan’s own steel case connect?
The trade in this steel runs both ways. On Aug. 14, 2026, Taiwan’s Ministry of Finance opened its own anti-dumping case on flat cold-rolled stainless steel from Viet Nam2.
Taiwan’s case covers steel from 0.05 mm to 6.10 mm thick2. The Taiwanese companies that asked for duties claim a dumping margin of 31.36% on Vietnamese steel in 20252. MOIT notes that this figure comes from the complainants, not from the investigators2.
Taiwan’s case looks at sales from July 1, 2025, to June 30, 20262. Its economic ministry had 40 days to give a preliminary finding on harm2. Taiwan’s finance ministry then has 70 days for a preliminary finding on dumping2.
The two cases are separate measures under separate laws. Viet Nam’s new case does not depend on Taiwan’s, and the documents draw no link between them.
Key points on Viet Nam’s stainless steel investigation
The table below sums up the case as the ministry announced it.
| Question | Answer |
|---|---|
| What happened? | Anti-dumping investigation opened |
| Who issued it? | Ministry of Industry and Trade |
| Legal act | Decision No. 2948/QD-BCT |
| Date opened | Nov. 6, 2026 |
| Goods covered | Cold-rolled stainless steel |
| Origins | China, Indonesia, Taiwan |
| Tariff codes | Nine codes under 7219 and 7220 |
| Who asked for it? | Posco VST and Tan Viet Metal |
| Duty now? | None yet; temporary duty possible |
| Who should register? | Importers, exporters, sellers, users |
| Registration deadline | Jan. 5, 2027 |
| Legal basis | Decree No. 86/2025/ND-CP |
The next fixed date is Jan. 5, 2027, the last day to register as an interested party1. After that, the ministry’s preliminary findings will show whether temporary duties will apply to stainless steel from the three origins.
Sources
- ↩ Bộ trưởng Bộ Công Thương ban hành quyết định điều tra chống bán phá giá thép không gỉ cán nguội từ … https://moit.gov.vn/tin-tuc/bo-truong-bo-cong-thuong-ban-hanh-quyet-dinh-dieu-tra-chong-ban-pha-gia-thep-khong-gi-can-nguoi-tu-trung-quoc-indoneisa-.html
- ↩ Đài Loan (Trung Quốc) khởi xướng điều tra chống bán phá giá đối với thép không gỉ cán nguội nhập … https://moit.gov.vn/tin-tuc/thi-truong-nuoc-ngoai/dai-loan-khoi-xuong-dieu-tra-chong-ban-pha-gia-doi-voi-thep-khong-gi-can-nguoi-nhap-khau-tu-viet-nam.html
- ↩ Từ 5/10, áp thuế chống bán phá giá với thép không gỉ cán nguội https://baochinhphu.vn/tu-5-10-ap-thue-chong-ban-pha-gia-voi-thep-khong-gi-can-nguoi-102170153.htm
- ↩ Nghị định số 86/2025/NĐ-CP quy định chi tiết một số điều của Luật Quản lý ngoại thương về các biện pháp phòng vệ thương mại. https://congbao.chinhphu.vn/van-ban/nghi-dinh-so-86-2025-nd-cp-44745.htm