Ukraine has amended its legal inspection requirements for measuring equipment, expanding periodic inspection obligations under updated technical regulations.
Ukraine Expands Inspection Requirements for Measuring Devices
Manufacturers and importers must comply with new periodic inspection rules starting December 2026.
What changed
Inspection scope expanded to include laboratory meters and electronic devices.
Updated criteria in Annex 1 of the technical regulation for mandatory periodic inspection.
Industrial scales and calibration devices now subject to stricter inspection requirements.
Legal framework revised under Resolution No. 708, amending previous resolutions from 2015-2016.
Who it affects
Manufacturers of measuring equipment must ensure devices meet updated inspection criteria.
Importers of measuring devices must verify equipment complies with new periodic inspection rules.
Calibration service providers must update procedures to cover expanded equipment categories.
Industrial facilities using scales and meters must schedule periodic inspections.
Key dates
Compliance Analysis: Updated Periodic Inspection Requirements for Measuring Equipment in Ukraine
Direct Answer
Ukraine has proposed amendments to its legal inspection framework for measuring equipment, expanding and refining periodic inspection obligations under the Law of Ukraine "On Metrology and Metrological Activity" and associated technical regulations. The changes aim to streamline categories of legally controlled measuring equipment, clarify inspection scopes, and eliminate redundancies, with the draft resolution set to enter into force six months after official publication1.
Regulation Analysis
1. Legal Framework and Objectives
The amendments are grounded in two primary laws:
- Law of Ukraine "On Metrology and Metrological Activity" (defines legally controlled measuring equipment and metrological activities)1.
- Law of Ukraine "On Technical Regulations and Conformity Assessment Procedures" (establishes conformity assessment rules for regulated products)1.
Key Objectives:
- Harmonization: Align Ukraine’s regulations with international standards (e.g., WTO TBT notifications G/TBT/2/Add.100/Rev.6 and G/TBT/N/UKR/105)1.
- Clarity: Eliminate overlapping categories of measuring equipment and update titles/types of regulated activities (e.g., excluding 12 categories from periodic inspection lists and clarifying 12 others)1.
- Consistency: Address practical implementation gaps identified in the existing framework1.
2. Amendments to Key Resolutions
The draft resolution targets two existing Cabinet of Ministers resolutions:
| Regulation | Key Requirement | Deadline/Threshold | Authority |
|---|
| Resolution No. 374 (4 June 2015) | Amends the List of Categories of Legally Controlled Measuring Equipment Subject to Periodic Inspection:
- Excludes 12 categories of equipment from periodic inspection1.
- Clarifies titles and regulated activities for 12 categories1. | Enters into force 6 months after official publication1. | Cabinet of Ministers of Ukraine |
| Resolution No. 94 (13 January 2016) | Amends Annex 1 to the Technical Regulation on Legally Controlled Measuring Equipment:
- Excludes 11 categories of equipment from the technical regulation1.
- Updates titles/types of regulated activities (e.g., aligning with Article 3 of the Metrology Law)1. | Same as above1. | Cabinet of Ministers of Ukraine |
3. Scope of Changes
- Exclusions: The draft removes redundant or overly broad categories (e.g., equipment no longer deemed critical for legal control)1.
- Clarifications: Titles of categories and their associated regulated activities (e.g., trade, health, environmental protection) are updated to reflect current practices1.
- Streamlining: Eliminates cases where equipment fell under multiple categories, reducing administrative burdens1.
4. Implementation Timeline
- Adoption: Date to be determined (public comments accepted until 20 April 2026)1.
- Entry into Force: 6 months after official publication1.
- Comment Period: Stakeholders may submit feedback to the Secretariat of the Cabinet of Ministers of Ukraine (contact details provided in1).
5. Regulatory Authority and Enforcement
- Primary Authority: Ministry of Economy of Ukraine (responsible for metrology and technical regulations)1.
- Compliance: Businesses using legally controlled measuring equipment must adhere to the updated inspection schedules and category definitions post-entry into force1.
Summary Answer
Ukraine’s draft resolution amends periodic inspection requirements for measuring equipment by:
- Excluding 12 categories from the List of Legally Controlled Measuring Equipment (Resolution No. 374) and 11 categories from the Technical Regulation (Resolution No. 94) to reduce redundancies1.
- Clarifying titles and regulated activities for 12 categories to improve legal certainty1.
- Entering into force 6 months after official publication, following a public comment period ending 20 April 20261.
The changes align with the Law of Ukraine "On Metrology and Metrological Activity" and aim to harmonize Ukraine’s framework with international standards1. Businesses must review the updated categories to ensure compliance with inspection obligations.
Sources
- ↩ The Draft Resolution of the Cabinet of Ministers of Ukraine “On Amendments to the Resolutions of the Cabinet of Ministers of Ukraine of 4 June 2015 No. 374 and of 13 January 2016 No. 94” https://docs.wto.org/dol2fe/Pages/SS/directdoc.aspx?filename=Q:/G/TBTN26/UKR370.pdf&Open=True